If you're reasonably handy, and have experience cutting and fitting PVC pipe and running low voltage (24 volt) wire (which doesn't require an electrician under most local building codes), installing a Beam® system can be a fun, rewarding, low-cost weekend do-it-yourself project.

Your Beam dealer can provide you with everything you need including an Installation Manual and a "how to" videotape or you can view and/or click here to download both of these tools.

To find the Beam dealer nearest you, use the Dealer Locator feature on this web site. Easy.

Please check local building codes before installing as regulations vary across Canada.

A Beam Central Vacuum System can be installed in virtually any home — new or old — with no damage or costly alterations and very little mess. And, there's no outside venting required. You can do it yourself using our comprehensive Installation Manual — usually over a weekend depending on your home construction and layout.

Click here for seven easy steps to installing your Beam system